Consider The Purchase Of Glass Rotor Flowmeters From These 5 Aspects.

Dec 20, 2021

Rotameter is also called variable area flowmeter, that is, in the vertical measuring tube of the flowmeter, when the fluid flows through the tube from bottom to top, the float of the flowmeter moves upward, and the lift of the float at a certain position and the float At this time, the area of the circulation gap between the float and the cone tube of the flowmeter remains constant. The area of the gap is proportional to the rising height of the float, that is, a certain height of the float represents the flow rate, and the up and down movement of the float indicates the flow rate. Changes in value size.


General flowmeter selection can be considered from five aspects, these five aspects are instrument performance, fluid characteristics, installation conditions, environmental conditions and economic factors.

1. In terms of instrument performance:

When buying a flowmeter, the first consideration is the performance of the flowmeter, such as accuracy, repeatability, linearity, range, flow range, signal output characteristics, response time, pressure loss, etc.


2. Fluid characteristics:

Indexes of temperature, pressure, density, viscosity, chemical corrosion, abrasiveness, fouling, miscibility, phase change, electrical conductivity, etc. Such as electromagnetic flowmeter, electromagnetic flowmeter can only measure liquid, and it is conductive liquid.


3. In terms of installation conditions:

Pipeline layout direction, flow direction, length of the upstream and downstream side of the test piece, pipe diameter, maintenance space, power supply, grounding, auxiliary equipment (filter, getter), installation, etc.


4. Environmental conditions:

Environmental temperature, humidity, electromagnetic interference, safety, explosion-proof, pipeline vibration, etc.


5. Economic factors:

Instrument purchase, installation, operation, calibration, maintenance, instrument service life, spare parts, etc.


You Might Also Like